 |
 |
 |
|
This Round Disc Cutter comes with 18 hardened punches ranging from 3mm to 14mm in diameter, a round disc cutting base & a polished hardwood base to hold everything. To use it, select the size punch you would like, place your sheet metal in the slot and place your punch, sharp side against the metal, in the correct slot. Strike the beveled side of the punch with a heavy mallet until it pierces through the sheet metal. Be careful of your fingers and other items on your work surface. For use with soft metals as gold, silver, copper, brass, aluminum, and nickel silver up to 18 gauge thick. The cutting block has milimeters measurements etched onto it. Disc cutting base is 4-3/4" diameter by 1-1/2" high
- .- Material: Hardened High-Carbon Steel
- .- Punches: 18
- .- Punches: 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0
- .- Measures: 4-3/4" x 1-1/2" high.
- .- Maximum thickness up to 18 Gauge (1mm)
- .- Soft Metals Such As Gold, Silver, Copper, Brass or soft metal sheet
|
|
|
 |
|
 |
|
